Pool backwash and stormwater separation
Perth, Western AustraliaFor pool backwash and stormwater separation, check each stream and confirm where it may discharge. Pool projects can generate filter backwash, overflow and rainwater from surrounding paving.

Separate trade: ask before drawing a discharge route
Water Corporation directs owners to their local government for domestic pool and spa discharge options and says domestic pool backwash and drainage are not permitted to enter its sewer. Commercial aquatic facilities have separate trade waste requirements. Start with the relevant body and give them the type of pool, equipment and proposed discharge.
Describe each stream separately. A drain designed for roof water cannot be assumed suitable for pool wastewater, especially when it contains chlorine, salts or filter residue.
What to check at the property
Drainage provider: separate the jobs in the quote
Ask the pool provider to state the filter discharge arrangement. Ask the drainage provider to identify the intended route for rainwater from hard surfaces. Check the drawings together before trenches close and mark which connection serves which purpose.
Give filter backwash its own line on the plan
Show filter backwash separately from pool overflow and rainwater from the paving. Note the equipment that creates it and ask the relevant authority to confirm the permitted disposal option. Keep the arrangement with the pool documents for later equipment changes.
Related soakwell and drainage guides
Will a soakwell be suitable?
That depends on the discharge and the conditions applying at the property. Treat this page as a preparation guide and get the intended route confirmed before connecting equipment.

Pool backwash and stormwater separation: practical checks
What should the authority be asked about pool wastewater?
Give the authority the address, type of pool, relevant equipment and the proposed discharge method. Describe stormwater and pool wastewater separately on the plan. Confirm the current permitted destination for each stream before designing a connection or changing an existing one.

Get the details together
Use the enquiry form to see which details help describe the site and the work.
Frequently asked questions
Can filter backwash enter the roof system?
Do not assume it can. Ask the local authority and the pool provider to confirm the current permitted disposal route.
Why treat pool backwash and roof stormwater separately?
The streams can have different composition and disposal requirements. Identify what each line carries and ask the relevant authority to confirm the permitted arrangement at the address. A stormwater soakwell that receives rainwater does not by itself establish a permitted destination for pool wastewater.
Where should I show pool overflow on a stormwater sketch?
Mark pool overflow, pool filter backwash and rainwater from roof or paving on separate lines. Label each intended destination and flag anything that needs confirmation. Ask the pool and drainage providers to use the same sketch so their work and the check points can be matched later.
Who should I ask about the discharge route for pool filter backwash?
Ask the relevant local authority which pool filter backwash disposal options apply to your address. Share the confirmed arrangement with the pool contractor and keep the route separate on the drainage sketch. Label the roof and paving branches so a later provider can tell which line serves which purpose.
Can a new patio or paved pool surround alter the drainage brief?
A new paved pool surround or patio can change where rainwater collects, separately from how the pool equipment discharges. Mark the new surfaces, downpipes and low points on the plan. Ask the drainage provider to check where runoff goes when a collector or receiving point cannot take more water.




